Transmitter 200 mW
FPV 5.8G e00mW A transmitter / V module (TX)
Transmission Unit Weight: 34.5g (excluding antenna)
Video Format Supported: NTSC / PAL
Working Frequency: 5645-5945Mhz
Power: 7 to 13V (3S Lipo suggested, does not support Lipo 4S)
Transmission Current: 100mA
Dimension: 55 * 26 * 17mm (without antenna)
Antenna connection: SMA (TX module side)
Screen of 7 “(18cm)
For your immersion into FPV, with its integrated 5.8 Ghz receiver, no “blue screen” effect when the signal is weak.
Display Size: 7 ”
Display Type: TFT
Resolution: 800 x 480
Brightness: 450cd / m2
Contrast Ratio: 500: 1
Angle of view: 140 / 120degree (horizontal / vertical)
Operating Voltage: LiPo 2 to 3 S
Power connection T-DEAN
Power consumption: <6W
Dimension: 184 mm x 126 mm x 32 mm
Built-in Receiver: 5.8Ghz (RC305 5.8G)
2 video channels, including
AV1 for integrated receiver
An audio output
9 menu selection languages, including English.
Operating Temperature: -10 ℃ ~ + 65 ℃
Antenna of receiver type RP-SMA jack (delivered)
The original SONY color camera 700TVL CCD DSP Effio-E
FR-2 _-_ Version_2
Cable OSD included
Lens 2.1 mm
Wide angle of 140 °
High-resolution SONY Effio-E DSP, 700TVL processor
1/3 '' SONY Super HAD CCD Sensor
Dimenssions: 38mm x 38mm
Multifunctional OSD control menu line.
Multilingual OSD menu: English, German, French, Russian, Portuguese, Spanish, Japanese, Chinese.
Opening function Auto support autofocus lens aperture.
Anti-gloss function, it can capture the plate number of the vehicle clearly.